Hammond Skx PRO Reference Manual page 458

CUSTOM SETS - Pipe
438
3. Press the DIRECTION "
look like this:
4. Press the ENTER button.
If the ORGAN Type is set at A-100, B-3, C-3, Mellow, Vx, Farf or Ace, the following message will
appear:
5. Press the DIRECTION " " button to highlight "YES," then press the ENTER button. The
Information Center Display should now look like this:
You are now in the CUSTOM EDIT -PIPE FUNCTION Mode. You can now use the
DIRECTION and PAGE buttons in conjunction with the VALUE knob to make various changes.
These changes are explained starting on the next page.
HA<O>
SKX PRO Reference Guide
button three times. The Information Center Display should now