Hammond Skx PRO Reference Manual page 168

ORGAN Voice Section
148
5. Create a Drawbar registration - for example, 88 8800 008. You can confirm the registration
by consulting the Information Center Display.
6. Play some notes on the UPPER Keyboard. You will hear the notes play with the Drawbar
registration you just set up.
Now, we will add a Drawbar registration to the LOWER Keyboard.
TRY THIS:
1. Locate the LOWER DRAWBARS on the Control Panel.
2. Create a Drawbar registration - for example, 00 8400 000. You can confirm the registration
by consulting the Information Center Display.
3. Play some notes on the LOWER Keyboard. You will hear the notes play with the Drawbar
registration you just set up.
Finally, here is how to add a Pedal or Bass registration.
TRY THIS:
1. Locate the PEDAL DRAWBARS on the Control Panel.
2. Create a Pedal Drawbar registration - for example, 60. You can confirm the registration by
consulting the Information Center Display.
3. Turn the ORGAN SOLO button "ON."
4. Press the PEDAL TO LOWER button to transfer the Pedal tones to the LOWER Keyboard and
play some notes on the left end of the LOWER Keyboard. You will now hear the notes play
with Pedal tones added.
NOTE: On the SKX PRO, Drawbar Parameter changes for the PEDAL Part ("P") will not be heard
unless the PEDAL TO LOWER button is "ON" or a MIDI Pedal clavier is connected.
HA<O>
SKX PRO Reference Guide