Hammond Skx PRO Reference Manual page 682

Special Utility Features
662
2. Press the ENTER button. The Information Center Display should now look like this:
WARNING!: Doing the following procedures will erase all parameters, settings and registrations,
returning the instrument to the original Hammond factory default settings.
3. Press the ENTER button. You will see the following messages flash in the display for
approximately 1 second each:
NOTE: If you DO NOT wish to Reset, press either the PLAY or the MENU/EXIT button.
NOTE: You can also perform a DEFAULT ALL by turning the Power "ON" while Pressing and Holding
the red RECORD button.
NOTE: Please consult page 665 for a list of System Parameters.
HA<O>
SKX PRO Reference Guide