Hammond Skx PRO Reference Manual page 156

Favorites
136
The following is an example of how to create your own Combination Banks either with Factory
Combinations, your own Combinations or Bundles.
TRY THIS:
1. Make sure the MENU-SYSTEM-FAVORITE -BANK 1 FUNCTION Mode Page is displaying (see
below):
The number F001 should be highlighted.
Now, suppose you want to replace Combination F001 with F064 (Oct Saw Lead).
2. Turn the VALUE knob to the right. The Combination Number will change. Continue to turn
the Value control until you see Oct Saw Lead in the middle portion of the display.
After doing the above, the Oct Saw Lead Combination will be selected the next time you press the
FAVORITE 1 button.
HA<O>
SKX PRO Reference Guide