Table of Contents
Advertisement
PACSystems™ RXi Industrial Displays User Manual
GFK-3138E
3. Click on Login.
4. Drag and drop the firmware file to /tmp directory of Web Panel.
Note: Firmware filename is RXi_Yocto_Linux_WebPanel_r32X.tgz or
RXi_Yocto_Linux_WebPanel_No_EMRLogo_r32X.tgz)
5. Click OK to transfer the files.
Figure 150: Transfer the files
10.3
Updating the Firmware after Copying Firmware Files
10.3.1
Updating Firmware using SSH Client After SSH is Enabled
1. Confirm the IP address using the Network setup page.
Note: This step is necessary if using a DHCP address, Link-Local, or otherwise.
2. Connect to the Web Panel from your SSH client.
3. Verify the fingerprint. If correct, trust it
Figure 151: Verify Fingerprint and then Trust it
Firmware Update Instructions for the RXi - Web Panel
Section 10
Nov 2022
168
Advertisement
Table of Contents
