Table of Contents
Advertisement
PACSystems™ RXi Industrial Displays User Manual
GFK-3138E
9. Apply dc power to the unit. During normal startup and operation, the LED status indicator
displays as follows:
10. Once power is applied, the unit begins initializing. The first thing to display is the splash
screen.
Be sure to connect a DC power cord to this 3-pin power connector. Using a voltage out of the
range may fail to boot the system or cause damage to the system board.
Graphics Interface
The display port consists of the following:
DP++ Port
The DP++ is a digital display interface used to connect a display device such as a computer
monitor. It is used to transmit audio and video simultaneously. The interface, which is
developed by VESA, delivers higher performance features than any other digital interface.
BIOS Setting
Configure the display device in the Chipset menu ("DISPLAY control" submenu) of the BIOS.
Refer to chapter 3 for more information.
RJ45 LAN Ports
Features
2 Intel® I210IT PCI Express Gigabit Ethernet controllers (4 on larger box module)
The LAN ports allow the system board to connect to a local area network through a network
hub or router.
BIOS Setting
Configure the onboard LAN in the Advanced menu ("Wakeup Configuration" submenu) of the
BIOS. Refer to chapter 3 for more information.
Hardware
a. Solid amber while the RXi - Industrial Display unit is starting up
b. Solid green during normal operation
Section 6
Nov 2022
122
Advertisement
Table of Contents
