Network Stack Configuration - Emerson PACSystems RXi Panel PC User Manual

PACSystems™ RXi Industrial Displays User Manual
GFK-3138E
3.7.13

Network Stack Configuration

This section is used to enable or disable network stack settings.
Figure 47: Network Stack Configuration
BIOS Parameter
Network Stack
Ipv4 PXE Support
Ipv6 PXE Support
PXE Boot Wait Time
Media Detect Count
RXi – Panel PC Overview
Description
Enable or disable the UEFI network stack. When Network
Stack is set to enabled, the below settings will be shown.
When enabled, Ipv4 PXE boot supports. When disabled,
Ipv4 PXE boot support will not be available.
When enabled, Ipv6 PXE boot supports. When disabled,
Ipv6 PXE boot support will not be available.
Enter the wait time value for pressing ESC to abort the PXE
boot
The number of times the presence of media will be
checked. Use either +/- or numeric keys to set the value.
Section 3
Nov 2022
52