Table of Contents
Advertisement
PACSystems™ RXi Industrial Displays User Manual
GFK-3138E
Screen standby interval time can be set by incrementing the value between 1 to 30 minutes
and clicking the Apply button
Figure 76: Energy Saving Mode
3. Click on Setup to go back to main System Setup Page.
Note : Energy Saving Mode can be disabled by inputting the value to 0 and clicking the Apply
button.
4.3.7
User Password Settings
The non-privileged wpuser can only change the wpuser password, but the privileged wpadmin
can change both the wpuser and wpadmin password.
1. Navigate to Setup Page and provide the non-privileged wpuser credentials and click on
Confirm.
Figure 77: System Setup
RXi – Panel PC Overview
Section 4
Nov 2022
80
Advertisement
Table of Contents
