Table of Contents
Advertisement
PACSystems™ RXi Industrial Displays User Manual
GFK-3138E
Key Management
This section enables experienced users to modify secure boot variables.
Figure 34: Key Management
BIOS
Parameter
Default Key
Provision
Enroll All
Factory Default
Keys
Set New PK
Set new KEK
Append KEK
Set new DB
Append DB
RXi – Panel PC Overview
Description
Enable or disable to install factory default secure boot keys when the
system is in setup mode. When enabled, a pop-up window will display.
Select Yes and press Enter to install factory default keys.
Select Yes and press Enter to install ALL factory default keys, including PK,
KEK, DB, DBX, and DBT. Change takes effect after reboot.
Select Yes and press Enter to set a new PK or select No and press Enter to
load it from a file on external media.
Select Yes and press Enter to set a new KEK or select No and press Enter
to load it from a file on external media.
Select Yes and press Enter to set a new KEK or select No and press Enter
to load it from a file on external media.
Select Yes and press Enter to set a new DB or select No and press Enter to
load it from a file on external media.
Select Yes and press Enter to set a new DB or select No and press Enter to
load it from a file on external media.
Section 3
Nov 2022
36
Advertisement
Table of Contents
