Huawei UPS5000-A-200K-ST User Manual page 157

UPS5000-A-(200 kVA-800 kVA)
User Manual
●
Step 5 Route the signal cables on the left side of subracks along the left side of the
cabinet and the cables on the right side of subracks along the right side of the
cabinet, and then bind the cables to the cabinet, as shown in
Figure 3-109 Connecting signal cables
----End
Issue 05 (2020-04-27)
Figure 3-108 Neutral wire
One power source
If the mains input and bypass input share a power source, you do not need to
remove the copper bar between the mains and bypass input terminals or
connect the bypass input power cable.
NO TE
The number and colors of signal cables in
Copyright © Huawei Digital Power Technologies Co., Ltd.
Figure 3-109 are for reference only.
3 Installation
Figure 3-109.
149