Japanese Power Cord Notice; Country-Specific Certifications; Storage System Specifications; Physical Specifications - HP 6100 User Manual

Japanese power cord notice

Country-specific certifications

HP tests electronic products for compliance with country-specific regulatory requirements, as an
individual item or as part of an assembly. The product label (see
the regulations with which the product complies.
NOTE: Components without an individual product certification label are qualified as part of the
next higher assembly (for example, enclosure, rack, or tower).
Figure 39 Typical enclosure certification label
NOTE: The certification symbols on the label depend upon the certification level. For example,
the FCC Class A certification symbol is not the same as the FCC Class B certification symbol.

Storage system specifications

This appendix defines the physical, environmental, and power specifications of the EVA
4x00/6x00/8x00 storage systems.

Physical specifications

This section describes the physical specifications of the drive enclosure and elements.
Table 32 (page 118)
Table 32 Enterprise Virtual Array 4x00/6x00/8x00 Product Dimensions, Weight and Clearance
Physical Dimensions
Evacuees and
EVA8x00 2C2D
(42U rack)
EVA6x00 and
EVA8x00 2C6D
(42U rack)
EVA8x00 2C12D
(42U rack)
EVA4x00/6x00/8x00
Controller Assembly
M5314B/M5314C
Drive Enclosure

Environmental specifications

To ensure optimum product operation, you must maintain the operational environmental
specifications listed in
room temperature) is especially critical.
1 18 Regulatory notices and specifications
defines the dimensions and weights of the storage system components.
Height in/cm Width in/cm
78.75 23.7 (60.3)
(200.03)
78.75 23.7 (60.3)
(200.03)
78.75 23.7 (60.3)
(200.03)
7.0/17.78 17.6/44.70
5.25/13.34 19.0/42.26
Table 33 (page 119). The ambient temperature (the enclosure air intake or
Figure 39 (page
Depth in/cm Max Weight
lb/kg
40.2 (102.2) 537 (244.1)
40.2 (102.2) 854 (308.2)
40.2 (102.2) 1290 (586.4)
27.5/69.85 120/54.55
20/50.8 71/32.21
118)) specifies
Req. Front Req. Rear
Clearance Clearance
in/cm in/cm
30 (76.2) 30 (76.2)
30 (76.2) 30 (76.2)
30 (76.2) 30 (76.2)
N/A N/A
N/A N/A