Table of Contents
Advertisement
Luna Par 120 Q4
6.
Operation
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as a theater spot. It is suitable only for indoor installation. This
device is not suitable for households and for general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency
match the input voltage, current and frequency specified on the information label on the device.
Control Modes
The Luna Par 120 Q4 can be operated with a DMX controller, and as a stand-alone device or in a
master/slave setup without a DMX controller.
The Luna Par 120 Q4 supports the following control modes:
●
Stand-alone:
●
Master/Slave:
●
DMX-512:
For more information about how to connect the devices, refer to 5. Setup on pages 16–18.
To operate the device manually as a stand-alone device or in a master/slave setup:
01) Select Manual Mode in the main menu.
02) Adjust the values for the colors in the respective submenus. See 6.6.2. Manual Mode on page 24 for
more information.
To run one of the built-in programs in auto operation mode:
01) Activate the auto operation mode in the Auto Mode menu.
02) Select one of the 33 color presets or 15 built-in chases. See 6.6.4. Program Settings on page 25 for
more information.
For more information about sound-controlled operation mode see 6.6.6. Sound Settings on page 25.
To operate the device with a DMX controller:
01) Set the DMX starting address of the device in the DMX Mode menu. See 6.6.1. DMX Mode on
page 24 for more information.
02) Select the DMX channel mode in the DMX Mode menu. See 6.6.1. DMX Mode on page 24 for more
information. See 6.7. DMX Channels on pages 28–29 for complete overview of all DMX channels.
Product code: 43322
Auto operation mode (built-in chases, color presets), manual operation
mode, sound-controlled operation mode (auto program)
Auto operation mode (built-in chases, color presets), manual operation
mode, sound-controlled operation mode (auto program)
4 channels, 6 channels and 11 channels
19
Advertisement
Table of Contents
