Luna Par 120 Q4
Start-up
Upon start-up the display will show a splash screen with the firmware version and the temperature of the
LEDs:
Immediately afterwards the display will show the start screen. The start screen provides information about
the control mode of the device, the firmware version and the temperature of the LEDs, for example:
Manual operation
Description of the icons on the start screen:
The DMX icon indicates that DMX signal is present. If the DMX signal is lost, this icon will not
appear on the screen.
The padlock icon indicates that the display lock is enabled. If the display lock is disabled,
this icon will not appear on the screen.
Note:
●
If no button is pressed, after 50 seconds of inactivity the display will turn off. Press any button to turn
the display on.
●
By default the display is locked. To access the main menu, you need to enter the password. Press
and hold down the MODE and SETUP buttons for 3 seconds. A timer counting from 0 to 3 will appear
next to the padlock icon on the screen. See 6.6.7.2. Lock on page 27 for more information.
Product code: 43322
11-channel DMX mode with
starting address 001
21
Auto operation mode