Figure 74
1. Cap
2. 4-socket connector
(labeled RH R
EAR
L
—machine wire
IGHT
harness)
3.
Plug the 4-pin connector labeled RH Rear
Lights of right taillight harness into the 4-socket
connector labeled RH R
machine wire harness
Important:
Ensure that the harnesses are
routed away from the exhaust pipe.
4.
Close and latch the hood.
12
Connecting the Battery
No Parts Required
Procedure
1.
Connect the positive battery cable to the positive
battery post
(Figure
over the terminal.
3. 4-pin connector (labeled
RH Rear Lights—right
taillight harness)
L
of the
EAR
IGHT
(Figure
70).
75), and slip the rubber boot
1. Battery
2.
Connect the negative (black) battery cable.
3.
Close the battery compartment cover
76) until it securely snaps shut.
g350907
1. Battery cover
31
Figure 75
(Figure
Figure 76
g020451
g351816