Toro Groundsmaster 4000 Series Installation Instructions Manual page 20

2. Plug the 12-pin connector of the console
harness into the 12-socket connector of the
machine wire harness
7
Installing the Identity Plate
Machines Operated in Germany
Parts needed for this procedure:
1 Tape (double-face adhesive)
1 Identity plate
Procedure
1. Remove the backing from the double-face
adhesive tape (Figure
1. Tape (double-face
adhesive)
2. Backing film
2. Adhere the tape to the identity plate
(Figure 45).
46).
Figure 46
3. Identity plate
(Figure
3. Clean the right support channel below the
operator's platform, and allow the channel to dry
(Figure 47
1. Identity plate
2. Support channel
4. Remove the backing film from the identity plate
(Figure 46) and adhere the plate to the support
channel as shown in
g351074
46).
20
and Figure 48).
Figure 47
Figure 48
3. 3 mm (1/8 inch)
4. 22 mm (7/8 inch)
Figure 48.
g350944
g350945