Toro Groundsmaster 4000 Series Installation Instructions Manual page 28

Figure 65
1. Hood pivot bracket
2. Align the holes on the slow moving vehicle
mount with the slots in the hood pivot bracket
(Figure 66).
Figure 66
1. Slow moving vehicle
mount
3. Assemble the slow moving vehicle mount to
the hood pivot bracket
flange-head capscrews (3/8 x 1-1/4 inches).
g351162
g351163
2. Flange-head capscrew
(3/8 x 1-1/4 inches)
g350821
2. Flange-head capscrew
(3/8 x 1-1/4 inches)
(Figure 66) with the 2
4. Torque the capscrews to 37 to 45 N∙m (27 to 33
ft-lb).
Installing the Speed Decals to the
Hood
1. Clean the side of the hood at the decal
placement area shown in
the hood to dry.
1. 29 cm (11-1/2 inches)
2. Remove the backing film from the speed decal
(Figure 68) and adhere it to the hood at the
location shown in
1. Speed decal
3. Repeat steps
hood.
28
Figure 67, and allow
Figure 67
2. 7.5 cm (2-7/8 inches)
Figure 67.
Figure 68
1 and 2 at the other side of the
g351175
g350690