Toro Groundsmaster 4000 Series Installation Instructions Manual page 19

Figure 42
Figure 43
1. Horn and bracket
2. Flange locknut (5/16 inch)
3. Column brace
2. Secure the horn bracket to the column brace
(Figure 43) with a capscrew (5/16 x 3/4 inch)
and flange locknut (5/16 inch).
3. Connect the 2 spade-socket connectors of the
machine wire harness to the electrical terminals
of the horn (Figure
4. Capscrew (5/16 x 3/4 inch)
5. Right side of the machine
44).
g351028
1. Horn
2. Spade-socket connector
4. Secure the horn wires with a cable tie.
Connecting the Harness
1. Remove the cap from the 12-socket connector
of the machine wire harness
g351025
1. 12-socket connector
(machine wire harness)
2. Cap
19
Figure 44
3. Cable tie
(Figure 45).
Figure 45
3. 12-pin connector (console
harness)
g351026
g351027