Operation - Toro Groundsmaster 4000 Series Installation Instructions Manual

Operation

Controls
Note:
Check the operation of the lights. Make sure
that the correct lights are flashing when operating the
turn signal switch.
1. Light switch
2. Turn signal switch
Using the Lights
1. O
FF
2. Road lights O
N
Figure 77
3. Horn button
Figure 78
3. Road lights and optional
work light O
N
1. Turn the key switch on and press the light switch
to the O
N
2. Rotate the light switch
to the following positions:
•
O
FF
•
Road lights O
•
Road lights and optional work light O
Using the Turn Signal
•
Move the turn signal switch
signal a right turn.
•
Move the switch down to signal a left turn.
•
Move the switch to the middle position to shut off
the turn signals.
Using the Horn
Press the horn button
Using the Hazard Lights
g351077
1. Hazard switch
•
Press the top of the switch
hazard lights..
Note:
The hazard switch illuminates when
g351478
running the hazard lights.
•
Press the bottom of the switch to shut off the
hazard lights.
32
position.
(Figure 77
N
(Figure
(Figure 77) to sound the horn.
Figure 79
(Figure
and Figure 78)
N
77) up to
g351460
79) to run the