Toro Groundsmaster 4000 Series Installation Instructions Manual page 10

Figure 16
Groundsmaster 4000 shown; the Groundsmaster 4100 is
4. For Groundsmaster 4000 machines, route the
6-socket connector (labeled H
H RH of the machine wire harness
EADLIGHT
through the grommet as shown in
Figure 17
Groundsmaster 4000 Machines
1. 6-socket connector
(labeled H LH or
EADLIGHT
H RH—machine
EADLIGHT
wire harness)
5. Remove the cap from the 6-socket connector
labeled H
EADLIGHT
labeled H
EADLIGHT
into the headlight
similar.
LH or
EADLIGHT
Figure
2. Grommet
LH or the 6-socket connector
RH, and plug the connector
(Figure 18).
g350888
17.
1. 6-socket connector
(labeled H
H
EADLIGHT
wire harness)
2. Cap
6. Bundle the excess wire harness and secure it to
the chassis with a cable tie.
7. Repeat steps
g350903
light mount at the other side of the machine.
Installing the Headlights and Light
Mounts
Machines with a Cab
1. Assemble the headlight and light mount to the
headlight bracket on the cab frame
with a flange-head capscrew (1/2 x 1 inch),
flange locknut (1/2 inch), carriage bolt (1/4 x 5/8
inch), and flange locknut (1/4 inch).
10
Figure 18
3. Headlight
LH or
EADLIGHT
RH—machine
1 through 6 for the headlight and
g350820
(Figure 19)