Toro Groundsmaster 4000 Series Installation Instructions Manual page 30

Figure 71
1. Push-in anchor
2. Hole (hood-hinge
mount—left)
2. Remove the cap from the 2-socket connector of
the license-plate light wiring branch
3. Plug the 2-pin connector of the license-plate light
into the 2-socket connector of the left taillight
harness (Figure 76).
Figure 72
1. 2-pin connector
(license-plate light)
g351443
3. Cap
4. 2-socket connector
(license-plate light
branch—left taillight
harness)
(Figure 75).
g351442
2. 2-socket connector
(license-plate light
branch—left taillight
harness)
Routing and Connecting the Right
Taillight
1. Route the 4-socket connector labeled RH R
L of the machine wire harness under the left
IGHT
frame rail and forward
1. Magnetic harness anchor
2. At the inboard side of the frame rail, remove
the cap from the 4-socket connector labeled RH
R L of the machine wire harness
EAR IGHT
80).
30
(Figure 73).
Figure 73
EAR
g351427
g351445
(Figure