Toro Groundsmaster 4000 Series Installation Instructions Manual page 18

2. Plug the 9-pin connector of the multi-function
switch harness into the 9-socket connector of
the console harness
1. 9-pin connector
(multi-function switch
harness)
3. Secure the console harness to the steering
column with 2 cable ties.
Installing the Control Cover
1. Align the holes in the control cover to the holes
in the switch mount
1. Switch mount
2. Push-in fastener
2. Using the middle holes, secure the cover to
the mount with 2 push-in fasteners as shown
in Figure 40.
3. Secure the cover to the mount with 4
flange-heads screws (1/4 x 3/4) as shown in
Figure 41.
(Figure 39).
Figure 39
2. 9-socket connector
(console harness)
(Figure 40).
Figure 40
3. Control cover
1. Flange-heads screw (1/4
x 3/4 inch)
g350777
6
Installing the Horn and
Connecting the Console
Harness
Parts needed for this procedure:
1 Horn
1 Capscrew (5/16 x 3/4 inch)
1 Flange locknut (5/16 inch)
1
Cable tie
Assembling the Horn
1. Align the hole in the bracket of the horn with the
hole in the column brace as shown in
g350789
18
Figure 41
2. Control cover
Figure
g350771
43.