Toro Groundsmaster 4000 Series Installation Instructions Manual page 24

Figure 56
1. Left light housing
2. 4-socket connector (left
taillight and license plate
harness)
3. 2-socket connector (left
taillight and license plate
harness)
2. Assemble the 4-socket connector of the right
taillight and license plate harness into the right
light housing (Figure
3. Assemble 2 clip nuts onto the inner mount as
shown in Figure 57.
4. Right light housing
5. 4-socket connector (right
taillight harness)
56).
1. Inner mount
2. Clip nut (1/4 inch)
4. Align the 4-socket connector of the harness
g351322
through the inner mount
5. Assemble the inner mount into the light housing,
and secure the mount to the housing
with 4 socket-head screws (1/4 x 3/4 inch).
6. Repeat steps
mount and light housing.
24
Figure 57
3. Light housing
4. Socket-head screw (1/4 x
3/4 inch)
(Figure 57).
3 through 5 for the other inner
g350574
(Figure 57)