Toro Groundsmaster 4000 Series Installation Instructions Manual page 6

Identifying the Headlights
At the bracket side of the headlight, look at the
information printed on the housing
the part number and the "RH" or "LH" information.
Identifying the Headlight Mounts
Use Figure 5, Figure 6, and
headlight mounts for your machine.
Groundsmaster 4000 Machines
1. Left light mount
Groundsmaster 4100 Machines
1. Left light mount
(Figure 4). Note
Figure 4
Figure 7 to identify the
Figure 5
2. Right light mount
Figure 6
2. Right light mount
1. Left light mount
g350385
Removing the Floor Panel
Hardware
Machines with a Roll Bar
Remove the 2 capscrews and 2 thin washers, 2 thick
washers, and 2 flange locknuts that secure the front of
the floor panel to the frame of the machine
Note:
Retain the hardware.
g350857
1. Capscrew (1/2 x 4-1/2
inches)
2. Floor panel
3. Thin washer (1/2 x 1-3/8
inch)
Assembling the Headlights
Groundsmaster 4000 Machines
g350858
Important:
Ensure that you assemble the
headlight marked left and the left light mount,
and the headlight marked right and the right light
mount.
1. If assembled, remove the locknut (12 mm) and
lock washer (12 mm) from the capscrew in the
headlight bracket.
6
Figure 7
Machines with a Cab
2. Right light mount
Figure 8
4. Flange locknut (1/2 inch)
5. Thick washer (1/2 x 2-1/4
x 3/8 inch)
g350858
(Figure 8).
g350418