Toro Groundsmaster 4000 Series Installation Instructions Manual page 27

Figure 63
1. Bumper
2. Spacer
3. Flange-head locknut (1/4
inch)
2. Remove the backing film from the speed decal.
3. Align the speed decal to the slow moving vehicle
mount, and adhere the decal to the mount
(Figure 63).
4. Assemble the 2 nut clips (#10) to the slow
moving vehicle mount
g350747
4. Slow moving vehicle
mount
5. Speed decal
(Figure 64).
1. Nut clip (#10)
2. License-plate light
5. Align the harness of the license-plate light
through the slow moving vehicle mount
64).
6. Secure the license-plate light to the nut clips
(Figure 64) with 2 socket-head screws (#10 x
3/4 inch).
Assembling the Slow Moving
Vehicle Mount to the Hood
1. At each hood pivot bracket
the rearmost flange-head capscrew (3/8 x 1-1/4
inches).
27
Figure 64
3. Socket-head screws (#10
x 3/4 inch)
(Figure 65), remove
g350775
(Figure