Maintenance - Toro Groundsmaster 4000 Series Installation Instructions Manual

Adjusting the Headlights
1. Loosen the mounting locknuts and capscrews to
adjust the lights (Figure
Figure 80
1. Capscrew (horizontal light
adjustment)
2. Locknut (horizontal light
adjustment)
2. Adjust the lights per local standards.
3. Tighten the locknuts and capscrews
76).
g351458
3. Locknut and capscrew
(vertical light adjustment)
(Figure 76).

Maintenance

Servicing the Fuses
Replacing a Fuse Block Fuse
1. Park the machine on a level surface, engage the
parking brake, lower the cutting units, shut off
the engine, and remove the key.
2. Remove the electrical cover, refer to
the Electrical Cover (page 21)
Electrical Cover (page
3. Replace the open fuse.
Fuse-block slot Protected Circuits
A3 EU light kit power
A4 Road light kit
D4 Horn
1. Fuse (10 A) and fuse-block
slot A3
2. Fuse (10 A) and fuse-block
slot D4
4. Install the electrical cover; refer to
the Electrical Cover (page 22)
Electrical Cover (page
Replacing a Taillight Fuse
1. Park the machine on a level surface, engage the
parking brake, lower the cutting units, shut off
the engine, and remove the key.
2. Unlatch and open the hood.
3. Remove the cap from the in-line fuse holder
(Figure 82).
33
Removing
or Removing the
21).
Fuse Rating
10 A
15 A
10 A
Figure 81
3. Fuse (15 A) and fuse-block
slot A4
Installing
or Installing the
22).
g351013