Honeywell UDC2800 Product Manual page 140

Function Prompt
CO Range
CO Low Value
Selections or Range
of Setting
SP
Local SP 1
Local SP 2
Local SP 3
Local SP 4
Remote SP
Input Algorithm 1
4-20mA
0-20mA
Low Scale Value
Chapter 4 - Configuration
Parameter Definition
Setpoint represents the value of the
setpoint currently in use (LSP1,
LSP2, LSP3, LSP4, RSP or CSP) and
is shown in the same units as those
used by the PV.
Auxiliary output represents Local
Setpoint 1 regardless of active
setpoint.
Auxiliary output represents Local
Setpoint 2 regardless of active
setpoint.
Auxiliary output represents Local
Setpoint 3 regardless of active
setpoint.
Auxiliary output represents Local
Setpoint 4 regardless of active
setpoint.
Remote Setpoint represents the
configured RSP regardless of the
active SetPoint.
Input Algorithm 1 Output represents
the output from input algorithm 1.
Auxiliary Current Output Range —
Allows the user to easily select 4-
20mA output or 0-20mA output
operation without the need for
recalibration of the instrument.
ATTENTION: Changing the
Auxiliary Current Output
Range will result in the loss of
Field Calibration values and
will restore Factory Calibration
values.
Auxiliary Output Low Scaling Factor
140