Advanced Mode - Siemens SICHARGE UC 150 Operating Instructions Manual

8.2.6.4

Advanced mode

Requirement
You have authenticated yourself by entering a PIN.
Advanced settings
Information and setting options for each charging port are shown in the area "Advanced
settings". To open the area, select the "Advanced settings" button in the Settings (Page 68).
Figure 8-9 Advanced settings
If there are several dispensers, select the one you require using the drop-down menu.
The following information is displayed:
Table 8-1 Information about the electricity supply
Section Voltage
L1-L2 Voltage between the phases in Volt
L2-L3 Voltage between the phases in Volt
Output Voltage at the output in Volt
DC link voltage Voltage between rectifier and inverter
Frequency Line frequency in Hz
Table 8-2 Information about temperature
SICHARGE UC 150
Operating Instructions, 10/2022, A5E50068475-AB
8.2 Operation via HMI
Current
Current between the phases in Ampere
Current between the phases in Ampere
Current at the output in Ampere
Operation
71