Replacing An Air Filter - Siemens SICHARGE UC 150 Operating Instructions Manual

Clean the charging plug
• Switch off the charging station.
• Clean the charging connector with a dry cloth.
• Never immerse the charging plug in liquids.
10.3.3

Replacing an air filter

The air filters of the charging station remove the dust from the outside air pulled in for
cooling the interior. With increasing operating time, the filtered dust particles reduce the air
flow through the filters. The interior of the charging station is less cooled due to the reduced
air flow. This causes the temperature inside the charging station to rise.
To keep the air inside the charging station within the permitted temperature range, regularly
replace the fabric filters of the cabinet fans.
Required tools and spare parts
You will need the following tools to replace an air filter:
• Screwdriver
• Bit: Hexagon socket, width across flats 6
You will also need the following spare part:
• 4-fabric filter: Filter class G3 according to standard EN 779, dimensions: 223 x 223 mm
Position of the air filter
The following diagram shows the fan cover and the position of the air filters in the door.
① Filter for the upper fans
② Filter for the fans in the door
Figure 10-1 Air filter with open door
SICHARGE UC 150
Operating Instructions, 10/2022, A5E50068475-AB
Maintenance and service
10.3 Servicing the charging station
83