3. Connect the charging cable to the vehicle.
The charging plug locks and the vehicle is being charged.
4. Once the vehicle is charged or you finish charging via an external interface, remove the
charging cable from your vehicle.
SICHARGE UC 150
Operating Instructions, 10/2022, A5E50068475-AB
DANGER
Explosion or electric shock
If you are using a damaged charging cable or a damaged charging socket, you may cause
explosions, electric shock or short-circuits.
– Check the charging cable, the charging plug and the charging socket of the vehicle for
damage before each use.
– Never use a damaged charging cable.
– Never plug the charging plug into a damaged charging socket.
– If the charging cable or the plug-in connection is damaged during charging,
immediately press the DC shutdown switch of the charging station.
Operation
8.3 Operation without HMI
73