Connecting The Charging Cable - Siemens SICHARGE UC 150 Operating Instructions Manual

8.2.3

Connecting the charging cable

Connecting the vehicle
If you have not yet connected the charging cable to the vehicle, you are prompted after the
authentication to connect the plug with your vehicle.
Explosion or electric shock
If you are using a damaged charging cable or a damaged charging socket, you may cause
explosions, electric shock or short-circuits.
• Check the charging cable, the charging plug and the charging socket of the vehicle for
• Never use a damaged charging cable.
• Never plug the charging plug into a damaged charging socket.
• If the charging cable or the plug-in connection is damaged during charging, immediately
Figure 8-3 Connecting the charging cable
The charging plug is locked and the vehicle and charging station set up a connection.
Communication setup may take up to 60 seconds. If communication has not been
successfully established after 60 seconds, remove the charging cable and restart the process.
SICHARGE UC 150
Operating Instructions, 10/2022, A5E50068475-AB
DANGER
damage before each use.
press the DC shutdown switch of the charging station.
Operation
8.2 Operation via HMI
65