How To Take All The Zones Out Of Test Across A Network - EMS FirePoint 5000 Operating Manual

EMS 5000 FIREPOINT

14. How To Take All The Zones Out Of Test Across A Network

How to take all the zones out of test across a network (depending on which version of
software) on the 5000 FirePoint, insert the key into the Panels Control Key switch,
located at the right of the panel.
Step
No
1
2
3
4
5
6
7
8
9
10
Action
With the key in the "ON" position, the
screen will display:
Press the "0" key and the screen will now
display:
Press the "∇" key 3 times and press the "YES"
key and the screen will now display:
Press the "∇" key until the screen displays:
Press the "YES" key and the screen will now
display:
Press 221100 then press the "YES" key and
the screen will display:
Press Number 8 on the keypad and the screen
will now display: (number is a quick move key
that take you to the bottom of the menu)
Press the "∆" key once and the screen will now
display:
Press the "YES" key followed "0" key on the
keypad the screen will now display:
Press Number 8 on the keypad and the screen
will now display: (number is a quick move key
that take you to the bottom of the menu)
ENGINEERS OPERATING GUIDE, ISSUE 3.0 – 16/08/10
28
Screen Display
Panel in Access
Date Time
|***Options **** |
>Passwords <
| Time and Date |
Yes =Select Time
|** Fire system ** |
>Dev. Disable/Test <
| Net. Disable/Test |
Yes= Select Time
| System Mode |
>Engineers Config <
| Printer Options |
Yes= Select Time
Enter Your PIN
For Access>
Then Press YES
Time
|** Eng.; Config ** |
> Device Database <
| Sounder Options |
Yes= Select Time
| Reset System |
>Lan Options <
|^^^^^^^^^^^^^^ |
Yes= Select Time
| Reset Security |
> Reset System <
| Lan Options |
Yes= Select Time
|** Main Menu ** |
> Pins & Access <
| System Support |
Yes= Select Time
| Radio Lan |
> Fire DB <
| ^^^^^^^^^^^^^^ |
Yes= Select Time