EMS FirePoint 5000 Operating Manual page 15

EMS 5000 FIREPOINT
11
display:
12
instate (e.g. 125) then press the "YES" key and
screen will now display:
13
14
display:
15
16
display:
17
18
screen will now display:
Note: The "DETECTOR/ZONE DISABLED" LED on the 5000 FirePoint
Master Panel and System 5000 Slave Panel will clear and the Disable beep
will stop.
Press the "0" key and the screen will now
Enter the device number that you want to re-
Press the "∇" key until the screen displays:
Press the "YES" key once the Screen will now
Press the "∇" key until the screen displays:
Press the "YES" key once the Screen will now
Press the "NO" key until the screen displays:
Turn the Control key to the "OFF" Position. The
ENGINEERS OPERATING GUIDE, ISSUE 3.0 – 16/08/10
15
Enter Device
(Number 1-256)
Number > _
Yes = Finish Time
Time
| Panel : 04 |
> Device : 125 <
| Status :Disable |
Yes= Select Time
| Device : 125 |
> Status :Disable <
| Transmit Event |
Yes= Select Time
| Device : 125 |
> Status : Active <
| Transmit Event |
Yes= Select Time
|
Status : Active |
>Transmit Event <
| ^^^^^^^^^^^^^^ |
Yes= Select Time
Device 125 on NET 04
Set to ACTIVE
Push Any Key Time
Panel in Access
Date Time
Status Normal
Date Time