How To Disable Devices - EMS FirePoint 5000 Operating Manual

EMS 5000 FIREPOINT
11
12
key and the screen will now display:
The log for the date selected can be viewed by using the "∆ ∆ ∆ ∆ " & "∇ ∇ ∇ ∇ " Arrows next to the
display, all fire and fault events are listed in date and time order. Using number 5 on the
keypad will take you to the oldest event, number 8 on the keypad will take you to the
latest event. (Look at the fault list for examples of descriptions that are in the log).

4. How To Disable Devices

To disable a device on the 5000 FirePoint, insert the key into the Panels Control Key
switch, located at the right of the Panel. Turn the key to the "ON"
Step
No
1
2 "0" key and the screen will now display:
3 Press the "∇" key until the screen displays:
4
display:
5 Press the "YES" key and the screen will now
display:
6 Press the "0" key and the screen will now
display:
7 Enter the device number that you want to
and the Screen will now display:
Press the "YES" key and the screen will now
display:
Enter the required date to view in dd/mm/yy
format, (e.g.28/05/03) then press the "YES"
Action
With the key in the "ON" position, the screen
will display:
Press the "YES" key and the screen will now
Disable (e.g. 125) then press the "YES" key
ENGINEERS OPERATING GUIDE, ISSUE 3.0 – 16/08/10
9
Enter the date to
View: / /
Yes = Finish
- - - - - - - - - - - - - - - -
On 28/05/03 At 00:00
New Day of 28/05/03
Yes = Select
Screen Display
Panel in Access
Date Time
|***Options **** |
>Passwords <
|Time and Date |
Yes =Select Time
| Logging |
>Fire System Opts<
| Remote Access |
Yes = select Time
|** Fire system ** |
>Dev. Disable/Test<
| Net. Disable/Test |
Yes= Select Time
|** Device Status * |
>Number is: 001 <
|Status is: ACTIVE|
Yes= Select Time
Enter Device
(Number 1-256)
Number > _
Yes = Finish Time
Time
|** Device Status * |
>Number is: 125 <
|Status is: ACTIVE|
Yes= Select Time