How To Test Individual Sounders - EMS FirePoint 5000 Operating Manual

EMS 5000 FIREPOINT

15. How To Test Individual Sounders

To test individual sounders on the 5000 FirePoint, Insert the key into the Panels Control
Key switch, Located at the right of the panel.
Step
No
1
W
will display:
2
3
4
5 Press the "∇" key until the screen displays:
6 Press the "YES" key and the screen will now
display:
7
8 Press the "∇" key once and the screen will
display:
9 Press the "YES" key twice and the screen will
now display: (the first press of Yes enters you
into the sounder options menu the second
press of Yes does a configure stop)
10
11 Press the "YES" key and the screen will now
display:
Action
ith the key in the "ON" position, the screen
Press the "0" key and the screen will now
display:
Press the "∇" key until the screen displays:
Press the "YES" key and the screen will now
display:
Press 221100 then press the "YES" key
and the screen will display:
Press the "∇" key until the screen displays
:
ENGINEERS OPERATING GUIDE, ISSUE 3.0 – 16/08/10
30
Screen Display
Panel in Access
Date Time
|***Options **** |
>Passwords <
| Time and Date |
Yes =Select Time
| Logging |
> Fire System Opts <
| Remote Access |
Yes = select Time
|** Fire system ** |
> Dev. Disable/Test <
| Net. Disable/Test |
Yes= Select Time
| System Mode |
> Engineers Config <
| Printer Options |
Yes= Select Time
Enter Your PIN
For Access>
Then Press YES
Time
|** Eng.; Config ** |
> Device Database <
| Sounder Options |
Yes= Select Time
|
Device Database |
>Sounder Options <
| Log On Devices |
Yes= Select Time
| Sounder Config |
> Configure STOP <
| Configure START |
Yes= Select Time
| Configure START |
>Configure ONE <
| ^^^^^^^^^^^^^^^ |
Yes= Select Time
|** Configure ** |
>Sounder : ALLCFGD<
|Action : EVAC |
Yes= Select Time