EMS FirePoint 5000 Operating Manual page 22

EMS 5000 FIREPOINT
16 Press the "YES" key once and the screen will
now display:
17
will now display:
Note: After logging the device on to the system there will be two faults: -
st
1 fault is processor reset. (Silence and reset E.G. Page 3)
nd
2 fault is the Tamper. (Make sure the device tamper is clear then silence
and reset E.G. page 3)
18
control key to the "OFF" position. The screen will
display:
Press the "NO" key three times and the screen
After the faults have been cleared turn the
ENGINEERS OPERATING GUIDE, ISSUE 3.0 – 16/08/10
22
| Slot is :IN USE |
>Logon is DISABLED<
| /\/\/\/\/\/\/\/\/\/\ |
01 FAULT TOT 02
Default Device 125
ZONE 01 DEVICE 125
Status Normal
Date Time