How To Reset Fire & Fault Events - EMS FirePoint 5000 Operating Manual

EMS 5000 FIREPOINT
1. How To Reset Fire & Fault Events.
To reset fires/faults on the 5000 FirePoint, insert the Key into the Panel's Control Key
switch, located at the right of the Panel. Turn the Key to the "ON" Position.
Step
No
1
2
3
4
Action
This a normal Fire Event
Press the "SILENCE ALARMS" button and the
screen will now briefly display: (Press Any
Key). Having silenced the System's Sounders
and Internal Buzzers, an intermittent beep
every 10 – 15 seconds will occur until reset.
Press the "RESET/LED TEST" button and the
screen will now briefly display: (Press Any
Key)
The Event is now clear, so the key switch can
be returned to the "OFF" position. The screen
will now display:
ENGINEERS OPERATING GUIDE, ISSUE 3.0 – 16/08/10
6
Screen Display
01 FIRE ALARM TOT 01
RADIO CALLPOINT
DEVICE 005
ZONE 01
Alarms Silenced
Push Any Key
Device RESET:
RADIO CALLPOINT
Push Any Key
Status Normal
Date Time