How To Re-Instate A Disabled Device Across A Network - EMS FirePoint 5000 Operating Manual

EMS 5000 FIREPOINT

7. How To Re-instate a Disabled Device Across a Network

To re-instate a Disabled a device across the network on the 5000 FirePoint, insert the
key into the Panels Control Key switch, located at the right of the panel.
Step
No
1 With the key in the "ON" position, the screen
will display:
2 Press the "0" key and the screen will
display:
3 Press the "∇" key until the screen displays:
4 Press the "YES" key and the screen
display:
5
6 Press the "YES" key and the screen will now
display:
NOTE: PAN is for a Hardwired based System. (Go to step 7).
NET is for a Radio LAN based system. (Go to step 8).
7 Press the "YES" key to select the required panel
type and the Screen will now display:
8
(Where Panel type = NET/PAN)
9
number until the required panel number is
shown: (e.g. 04)
10
Action
Press the "∇" key until the screen displays:
Press the "∇" key until the screen will display:
Press the "YES" key to change the panel
Press the "∇" key until the screen displays:
will now
ENGINEERS OPERATING GUIDE, ISSUE 3.0 – 16/08/10
14
Screen Display
Panel in Access
Date
|***Options ****
>Passwords
now
| Time and Date
Yes =Select
| Logging
>Fire System Opts <
| Remote Access
Yes = select
| ** Fire system **
>Dev. Disable/Test <
| Net. Disable/Test |
Yes= Select
| Dev. Disable/Test |
>Net. Disable /Test <
| Det Zone Dis/Test |
Yes= Select
|* Network Status * |
>Panel Type : PAN <
| Panel : 00
Yes= Select
|* Network Status * |
> Panel Type: NET<
| Panel : 00
Yes= Select
| Panel Type : NET |
>Panel : 00
| Device : 00
Yes= Select
| Panel Type : NET |
>Panel : 04
| Device : 00
Yes= Select
|Panel : 04
>Device : 00
|Status :Disable |
Yes= Select
Time
|
<
|
Time
|
|
Time
|
Time
Time
|
Time
|
Time
<
|
Time
<
|
Time
|
<
Time