EMS FirePoint 5000 Operating Manual page 13

EMS 5000 FIREPOINT
11 Press
now display:
12 Enter the device number that you want to
Disable (e.g. 125) then press the "YES" key and
screen will now display:
13 Press the "∇" key once and the screen will
display:
14
15
display:
16
display:
17
will display:
18 Turn
Position. The screen will now display:
Note: The "DETECTOR/ZONE DISABLED" LED on the 5000 FirePoint
Master Panel and the 5000 FirePoint Slave Panel 04 will illuminate with
intermittent beep to show there's a disablement on the system.
the "0" key
Press the "YES" key once the screen will now
display:
Press the "∇" key once and the screen will
Press the "YES" key once the Screen will now
Press the "NO" key three times and the screen
the Control
and the screen
key to the "OFF"
ENGINEERS OPERATING GUIDE, ISSUE 3.0 – 16/08/10
13
Enter Device
(Number 1-256)
will
Number > _
Yes = Finish Time
| Panel : 04
>Device : 125
| Status : Active |
Yes= Select
| Device : 125
> Status : Active <
| Transmit Event
Yes= Select
| Device : 125
>Status : Disable<
| Transmit Event
Yes= Select
|Status : Disable |
>Transmit Event
|^^^^^^^^^^^^^^ |
Yes= Select
Device 125 on NET 04
Set to DISABLED
Push Any Key
Panel in Access
Date Time
Status Normal
Date Time
|
<
Time
|
|
Time
|
|
Time
<
Time
Time