How To Re-Instate Devices From Disablement - EMS FirePoint 5000 Operating Manual

EMS 5000 FIREPOINT

5. How To Re-instate Devices From Disablement

To reactivate a device on the 5000 FirePoint, insert the key into the Panels Control Key
switch, located at the right of the panel. Turn the key to the "ON" position.
Step
No
1
2
3
4
5
6
7
8
9
10
11
Note: The "DETECTOR/ZONE DISABLED" LED on the 5000 FirePoint Panel
will clear and the Disable beep will stop.
Action
With the key in the "ON" position, the screen
will display:
Press the "0" key and the screen will now
display:
Press the "∇" key until the Screen displays:
Press the "YES" key and the screen will now
display:
Press the "YES" key and the screen will now
display:
Press the "0" key and the screen will now
display:
Enter the device number that you want to Re-
enable (e.g. 125) then press the "YES" key and
the Screen will now display:
Press the "∇" key once and the screen will
display:
Press the "YES" key twice and the screen will
now display:
Press the "NO" key three times and the screen
will now display:
Return the Control key to the "OFF" position
and the screen will now display:
ENGINEERS OPERATING GUIDE, ISSUE 3.0 – 16/08/10
11
Screen Display
Panel in Access
Date Time
|***Options **** |
>Passwords <
|Time and Date |
Yes =Select Time
|
Logging |
>Fire System Opts <
|Remote Access |
Yes = select Time
|** Fire system ** |
>Dev. Disable/Test <
| Net. Disable/Test |
Yes= Select Time
| ** Device Status * |
>Number is: 001 <
|Status is: ACTIVE |
Yes= Select Time
Enter Device
(Number 1-256)
Number > _
Yes = Finish Time
| ** Device Status * |
>Number is: 125 <
|Status is: DISABLE|
Yes= Select Time
|Number is: 125 |
>Status is: DISABLE<
| Zone is : 01 |
Yes= Select Time
|Number is: 125 |
>Status is : ACTIVE <
| Zone is : 01 |
Yes= Select Time
Panel in Access
Date Time
Status Normal
Date Time