EMS 5000 FIREPOINT
10. How To Replace Devices
To replace a device onto the 5000 FirePoint, take the new device in front of the panel.
Insert the key into the Panels Control Key switch, located at the right of the panel.
Step
No
With the key in the "ON" position, the screen
1
will display:
2
Press the "0" key and the screen will now
display:
3
Press the "∇" key until the screen displays:
4
Press the "YES" key and the screen will now
display:
5
6
display:
7
Press 221100 then press the "YES" key and the
screen will display:
8
9
Press the "YES" key and the screen will now
display:
10
Press the "YES" key to change and the screen
will now display:
Action
Press the "∇" key until the screen displays:
Press the "YES" key and the screen will now
Press the "∇" key until the screen displays:
ENGINEERS OPERATING GUIDE, ISSUE 3.0 – 16/08/10
20
Screen Display
Panel in Access
Date
Time
|***Options ****
|
> Passwords
<
| Time and Date
|
Yes =Select
Time
|Logging
|
>Fire System Opts <
|Remote Access
|
Yes = select
Time
|** Fire system * *
|
> Dev. Disable/Test <
| Net. Disable/Test |
Yes= Select
Time
| System Mode
|
> Engineers Config <
| Printer Options
|
Yes= Select
Time
Enter Your PIN
For Access>
Then Press YES
Time
| ** Eng.; Config **
|
> Device Database <
| Sounder Options |
Yes= Select
Time
| Sounder Options |
> Log On Devices
<
| Site Survey
|
Yes= Select
Time
Logon DISABLED(000)
Push YES to change
Push NO to escape
Push YES/NO
Time
|**Logon Options** |
> Logon Slot :AUTO<
| Slot is
:FREE |
Yes= Select
Time