How To Put Detector Zones Into Test (Testing Devices) - EMS FirePoint 5000 Operating Manual

EMS 5000 FIREPOINT

11. How To Put Detector Zones Into Test (Testing Devices)

To put zones into test for the 5000 FirePoint, insert the key into the Panels Control Key
switch, located at the right of the panel. Turn the key to the "ON" position.
Step
No
With the key in the "ON" position, the screen
1
will display:
2 Press the "0" key and the screen will now
display:
3 Press the "YES" key and the screen will now
4
display:
5 Enter 221100 and press the "YES" key and the
screen will now display:
6 Press
now display:
7
8
9
10
Action
display:
Press the "YES" key and the screen will now
Any key
Press the "∇" key until the screen displays:
Press the "YES" key and the screen will now
display:
Press the "∇" key until the screen displays:
Press the "YES" key and the screen will now
display:
and the screen
ENGINEERS OPERATING GUIDE, ISSUE 3.0 – 16/08/10
23
Screen Display
Panel in Access
Date
|***Options ****
> Passwords
| Time and Date
Yes =Select
| *PIN's and ACCESS*|
>User Log ON
| View Users
Yes =Select
Enter Your PIN
To Log On > _
Then Press YES
******************* *
Welcome Engineer *
********************
Push Any Key
| Logging
will > Fire System Opts <
| Remote Access
Yes= Select
|***Options ****
> Passwords
| Time and Date
Yes =Select
|** Fire system **
> Dev. Disable /Test<
| Net. Disable /Test |
Yes= Select
| Net. Disable /Test
> Det Zone. Dis /Test <
| Alarm Zone Disable |
Yes= Select
| ** Zone Status **
> Zone is: 01
| Status : ACTIVE |
Yes= Select
Time
|
<
|
<
|
Time
Time
Time
|
|
Time
|
<
|
Time
|
Time
|
Time
|
<
Time