Fire (Networked Device); Pre-Alarm; Tamper; Fault Event - EMS FirePoint System 5000 User Manual

EMS SYSTEM 5000

8.2 Fire (Networked Device):

When a device on a Networked Control Panel has activated a Fire Alarm, the following
alarm screen will be shown: -
The above display shows that a Fire Alarm has been generated from Device 27, in Zone
1 on Panel 4.

8.25 Pre-Alarm:

When a Pre-Alarm event occurs the text on the display changes to show: -
The above display shows that Device 27 has entered a Pre-Alarm event, in Zone 3.

8.3 Tamper:

When a device generates a Tamper Alarm, the display will change to show: -
The above shows that Device 5 has generated a Tamper Alarm in Zone 1.

8.35 Fault Event:

When a Fault Event occurs the text on the display changes to show: -
01 FIRE ALARM TOT 01
CP THIRD FLOOR
GAMES ROOM
ZONE 01 P:04 DEV 027
01 PRE-ALARM
SS FIRST FLOOR
MAIN BEDROOM
ZONE 03 DEVICE 027
01 TAMPER
CP GROUND FLOOR
ENTRANCE LOBBY
ZONE 01 DEVICE 005
01 FAULT
RS SECOND FLOOR
MAIN CORRIDOR
ZONE 04 DEVICE 056
TOT 01
TOT 01
TOT 01
USER MANUAL, ISSUE 2.4 – 19/11/09
13