Chziri ZVF200-M User Manual page 41

Settings
Function
Multi-Step
Speed
Command
3
OFF
OFF
OFF
OFF
Multi-Step Speed
08
Command 3
ON
ON
ON
ON
Note: Off stands for the Multi-step input terminal
and COM switch on .
On Stands for the Multi-step input terminal
and COM switch off .
-76-
Chapter 6 Parameters
Description
Multi-Step Multi-Step
Selection for
Speed Speed
Multi-Step
Command Command
2 1
Zero Multi-step speed.
The running frequency
OFF OFF
can be set by the main
master frequency .
1st Multi-step speed.
OFF ON
The running frequency
can be set by P17.
2nd Multi-step speed.
ON OFF
The running frequency
can be set by P18.
3rd Multi-step speed.
ON ON
The running frequency
can be set by P19.
4th Multi-step speed.
OFF OFF
The running frequency
can be set by P20.
5th Multi-step speed.
OFF ON
The running frequency
can be set by P21.
6th Multi-step speed.
ON OFF
The running frequency
can be set by P22.
7th Multi-step speed.
ON ON
The running frequency
can be set by P 23.
Settings
Function
Jog operation will run when the inverter stop
completely . Can change the direction when jog
operation run . and the key STOP on the keypads
Jog Operation
09
is available .The motor will stop according to the
deceleration time when the external terminal switch
off .
Parameter value 10 programs Multi-Function
Input Terminal: X1,X2 (P38), X3 (P39), X4 (P40),
X5 (P41) or X6 (P42) for Accel/Decel Inhibit.
After receiving this command, the AC Drive stops
accelerating or decelerating and maintains a
constant speed.
Accel/Decel Speed
10
Inhibit
Parameter value 11 programs a Multi-Function
Input Terminal: X1,X2 (P38), X3 (P39), X4
(P40), X5 (P41) or X6 (P42) for selecting the
First or Second Accel/Decel time. (Refer to P10
to P13.)
First or Second
11 Accel/Decel Time
Selection
-77-
Chapter 6 Parameters
Description