Chziri ZVF200-M User Manual page 17

Chapter 4 Operation panel and Operation
4.1.3 Function Description on Operation Panel Indicator Lights
Display Status
The AC drives master frequency.
The actual running frequency
The customer unit(V)
The output current preset at terminal U V W
Run program automatic
Parameter item
Parameter value
the inverter is in the state of forward running.
the inverter is in the state of reverse running
"End" displays for approximately 1 second if input has been
accepted. After a parameter value has been set, the new
value is automatically stored in memory. To modify an
entry, use the
"Err" displays, if the input is invalid.
When the light is ON,inveter is running
RUN
When the light is ON,inverter will stop
STOP
When the light is ON, the inverter is in the state of forward
FWD
running
When the light is ON, the inverter is in the state of reverse
REV
running.
-28-
Function Description
and keys.
Chapter 4 Operation panel and Operation
4.1.4 Use of Operation panel
State parameter view
Initializing
Modification of parameter value (modify the parameter value for P16
jog function from 6.00Hz to 10.00Hz).
Initializing
Data fault
Data right
For a second
-29-