Objet350 User Guide
Frequency
Monthly
Monthly
Monthly
Every two years or every 3500
hours of printing
Maintenance Counters
The printer computer application records the dates and frequency for each
maintenance task. You can display the Maintenance Counters screen from the
Options menu.
Figure 6-22 Selecting Maintenance Counters
DOC-17001 Rev. L
Task
Clean debris from the Z-axis shaft with a vacuum
cleaner.
Inspect the exhaust system (duct, fan,
connections).
Calibrate the load cells.
Preventive maintenance visit by service engineer.
6 Operating and Maintaining the Printer
For More
Information
See "Calibrating the
Load Cells" on
page 6-74.
Contact your
Stratasys service
provider.
6-27