Table of Contents
Advertisement
Objet350 User Guide
4. Make sure that the build tray is empty, and close the printer cover.
5. When the following screen appears, open the cover.
6. Put on the cleaning gloves.
7. Using a generous amount of alcohol on the cleaning cloth, remove any
DOC-17001 Rev. L
Confirm this in the wizard screen, and click Next.
Figure 6-31 Tray and cover confirmation
Figure 6-32 W
iper Cleaning wizard during steps 6–10
material remaining on the wiper and the surrounding area.
6 Operating and Maintaining the Printer
6-33
Advertisement
Table of Contents
