Monitoring And Managing Print Jobs - Stratasys Objet350 User Manual

Objet350 User Guide
Monitoring and Managing Print Jobs
In the Job Manager screen of Objet Studio, you monitor and manage jobs sent to
the printer. There are a few differences between Objet Studio on client
workstations and on the computer connected directly to the 3D printer—the
server workstation.
• Objet Studio installed on a client computer only displays the queue and status
• Objet Studio installed on the computer directly connected to a specific 3D
If Objet Studio is not connected to a printer (or printer server), you can
prepare tray files for any PolyJet printer. Later, these files can be used by
Objet Studio on the appropriate printer server.
DOC-17001 Rev. L
for jobs sent to the 3D printer server from that computer, and it allows the user
to edit only these jobs.
Note: If there are several PolyJet printers on the local network, client
computers can connect to any of them, but only one at a time.
printer (server), displays the queue and status for all jobs sent to that 3D
printer by the server and by all client computers on the network. It also allows
editing and manipulation of all jobs, and enables re-sending previously-
printed jobs to the printer.
5 Using Objet Studio
5-80