Stratasys Objet350 User Manual page 191

Objet350 User Guide
5. In the following screen, select Continue with Head optimization if you
6. In the following screen, select Replace faulty heads, and click Next.
Preparing the Print Block
7. Select the print head(s) needing replacement, and click Next.
DOC-17001 Rev. L
have recently cleaned the print heads. Otherwise, cancel the wizard and run
the Head Cleaning wizard.
Figure 6-71 Clean print heads screen
Figure 6-72 Procedure selection screen
Figure 6-73 Head selection screen
6 Operating and Maintaining the Printer
6-57