Table of Contents
Advertisement
Objet350 User Guide
UV Sensor Connected to Printer
The following steps apply when using the Stratasys UV sensor box that you
connect to the printer. They do not apply when using a U V external radiation
measuring device.
1. To synchronize the wizard and the UV sensor, enter the CF number from the
2. Click Next.
DOC-17001 Rev. L
label on the back of the UV sensor box.
Figure 6-93 UV sensor synchronization
Figure 6-94 Label on the bottom of the UV sensor box
The build tray lowers so you can connect the UV sensor box.
6 Operating and Maintaining the Printer
6-68
Advertisement
Table of Contents
