Table of Contents
Advertisement
Objet350 User Guide
Using the Transform Dialog Box
You can make precise changes to an object by changing the properties in the
Transform dialog box.
To access the Transform dialog box (when an object is selected):
• Click
• From the right-click context menu, select Transform.
• From the Object menu, select Transform.
To change an object with the Transform dialog box:
➢ Change any of the values, then click Apply to see how the object changes on
Note: The changed values remain in the dialog box after clicking Apply.
Therefore, you can make small changes to values in the dialog box to see how
the object changes on screen each time you click Apply.
To reset all of the values in the dialog box:
➢ Click Reset.
Note: The object does not change. Any changes previously applied remain.
To undo all changes made with the Transform dialog box:
➢ Click Cancel Actions.
After closing the Transform dialog box, clicking Undo (on the Model Settings
ribbon or from the Edit menu) cancels all changes made with the dialog box.
DOC-17001 Rev. L
on the Model Toolbar or on the Model Settings ribbon.
Figure 5-44 Transform dialog box
the build tray.
5 Using Objet Studio
5-39
Advertisement
Table of Contents
